Datalogic PowerScan 7000BT Specifications

Datalogic PowerScan 7000BT Specifications
Dimensions	Reader: 20.3 x 7.6 x 11.4 cm / 8.0 x 3.0 x 4.5 in
	Base Station: 23.9 x 11.7 x 4.8 cm / 9.4 x 4.6 x 1.9 in
	Weight: Scanner: 13.9 oz / 395 g Base: 357.2 g / 12.6 oz
Optical	Light Source - LED Array 630 - 670 nm
	Max Scan Rate: 500 reads/sec.
	Max Resolution: 0.100 mm / 4 mils
	Print Contrast Ratio: 20% min.
	Reading Angle: Pitch: +/- 65°; Roll (Tilt): +/- 40°; Skew (Yaw): +/- 60°
	Reading Indicators: Beeper (Adjustable Tone); Good Read LED
	Supported Barcodes: 1D: Autodiscriminates all standard 1D codes including GS1 DatabarTM linear codes STACKED: GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional; MicroPDF417; PDF417
Electrical	Recharge time: 4 hours
	Power (max) 0.9 mW (M9300) / 13. mW (M8300 Auto Range)
	Battery: Li-Ion 2400 mAh
	Opearting automony: 22,000 reads in 16 hours
Communications	RS-232 / IBM 46XX / USB Multi-Interface RS-232 / USB / Keyboard Wedge / Wand Multi-Interface
Radio:	Frequency: 2.40 to 2.48 GH z
	Range (Max in open air): 100.0 m / 328.1 ft
	Protocol: Bluetooth® 2.0 Certified Class 1
Environmental	Operating temperature: -20 to 50 °C / -4 to 122 °F
	Storage temperature: 20 to 60 °C / -4 to 140 °F
	Drop Resistance: Withstands 50 drops from 2.0 m / 6.6 ft onto a concrete surface
	IP Rating: IP65 - Dust proof, sealed up to low pressure water jets from all directions
Safety / Regulatory	Environmental: Complies to EU RoHS
Safety / Regulatory	Laser classification: CDRH Class II; IEC 60825 Class 2(Caution: Laser Radiation - do not stare into beam)