| OPERATIONAL | |
| Light Source | Red LED 610-650 nm |
| Depth of Scan Field |
4 mils: 2.0 to 11.0 cm / 0.8 to 4.3 in 5 mils : 1.5 to 15.0 cm / 0.6 to 6.0 in 7.5 mils : 0.8 to 25.0 cm / 0.3 to 10.0 in 10 mils: 0.8 to 38.0 cm / 0.3 to 15.0 in 13 mils: 1.9 to 45.0 cm / 0.7 to 18.0 in 20 mils: 2.5 to 65.0 cm / 1.0 to 26.0 in |
| Scan Speed | 270 reads/sec |
| Minimum Bar Width | 4 mils: 2.0 to 11.0 cm / 0.8 to 4.3 in |
| Decode Capability | 1D Codes: Autodiscriminates all standard 1D codes including GS1 DataBar™ linear codes |
| System Interfaces | RS-232 / IBM 46XX / USB Multi-Interface: QD2110 RS-232 / USB / Keyboard Wedge / Wand Multi-Interface: QD2130 |
| Print Contrast | 15% minimum reflectance difference |
| Reading Angle | Pitch: +/- 65°; Roll (Tilt): +/- 45°; Skew (Yaw): +/- 65° |
| Beeper Operation | Programmable |
| Number Characters Read | Up to 80 data characters (maximum will vary based on symbology and density) |
| Indicators (LED) | Datalogic ‘Green Spot’ Good Read Feedback; Good Read LED |
| MECHANICAL | |
| Dimensions | 17.0 x 7.1 x 6.6 cm / 6.7 x 2.8 x 2.6 in |
| Weight | 121.9 g / 4.3 oz |
| ELECTRICAL | |
| Input Voltage | QD2110: 4 -14 VDC; QD2130: 5 VDC +/- 10% |
| Current Operating |
340 mA @ 5 VDC |
| Current Standby | 190 mA @ 5 VDC |
| LED Class | IEC 60825-1 Class 1 LED Product |
| ENVIRONMENTAL | |
| Operating Temperature | 0 to 50 °C / 32 to 122 °F |
| Storage Temperature | -40 to 70 °C / -40 to 158 °F |
| Ambient Light | 100,000 lux |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Shock | Withstands repeated drops from 1.5 m / 4.9 ft onto a concrete surface |
| Contaminants | IP42 - Sealed against Granular foreign bodies, diam. >1mm and spray water from all directions |
| Ventilation | None required |