| MECHANICAL |
| Weight: 14.3 lbs |
| Dimension: (in inches) |
| Height: 3.3 |
| Width: 15.7 |
| Depth: 16.1 |
| Bill and Coin Tray Adjustable slots. |
| ELECTRICAL |
| CR3000: (Control signal from POS printer) Pulse amplitude 12 to 24 volts DC; Pulse width 100 to 200 milliseconds Pulse duty cycle 10% max. |
| CR3001: Power adapter input 120VAC; 220VAC optional; Power adapter output 12VAC; Power adapter current 1000ma |
| CR3002: Pulse amplitude +12 volts; Pulse width 50u sec - 6.7m sec; Pulse duty cycle 20% min |
| INTERFACE |
| CR3000 (Printer Driven) Connects to POS printer drive circuit via supplied cable |
| CR3001 (4-in-1 smart interface) Serial input; Data format RS232C |
| Protocol Baud Rate: 150, 300, 600, 1200, 2400, 4800, 9600*, 19200 |
| Parity None*, Odd, Even Data Bits 7, 8* |
| Parallel input: Data format Centronics interface |
| *Default values |
| CR3002: RS232C, any protocol |
| OPEN DRAWER COMMAND |
| CR3000: Pulse from Printer drive circuit |
| CR3001: Printer Pulse from Printer drive circuit; Dedicated RS232C: Any software transmitted data; Non-dedicated RS232C: Programmable security code (1-255 hex, preset to 07 Hex) |
| Parallel Programmable: security code(1-255 Hex, preset to 07 Hex) |
| CR3002: Any software transmitted data |
| NOTES |
| CR3000: Logic Controls supports all POS printers. Please specify POS printer type when ordering. Cable, keys, and manual supplied. |
| CR3001: Power adapter, serial interface cable (to computer), keys, and manual supplied. For parallel connections user must supply cables. |
| CR3002: No power adapter required. Manual, keys, and serial interface cable supplied. |